The AdvanceWirlessCharger™ is a complete, self-contained wireless charger System. By placing the Kyocera® DuraForce Pro™ phone into the charger cradle the AdvanceWirlessCharger™ will Implement a 5W wireless charging algorithm and will automatically adjust the charging power, based on the feedback from the phone. The AdvanceWirless Charger contains a custom controller for managing the charging protocol and functions.

EASY TO USE – JUST DROP IN

  • No cable necessary
  • Rapid charging
  • Batteries can be charged anytime
  • Use as a desktop or mobile

Features
• Charger size 7.25” x 3.75” x 2.9”
• Hi impact V0 (flammability ratings) PC/ABS
• Self-contained 5W compliant wireless transmitter
• Determines correct wireless power protocol depending on the Kyocera DuraForce Pro phone.
• Input Voltage Range: 7V – 19V DC
• Emitting frequency: 115 kHz
• Max Charging current 1.5A
• Power supply 110VAC Input @ 12VDC 1A output

DON’T BLAME THE BATTERY…
Before you contact your communications supplier to purchase a replacement battery, consider this: today’s high-quality nickel cadmium (Ni-Cd), nickel metal hydride (Ni-MH) and Lithium Ion (Li-Ion) batteries are only as effective as the chargers on which they are placed at the end of the day. Not all chargers are the same and different chemistry batteries need to be charged differently.

There are 2 very important aspects to the charging of a battery that inevitably will determine how long it will last after the charge and how long it will last before it drops below an acceptable level:

  • The method used to charge the battery
  • The method used to terminate the charge

AdvanceTec’s Li-Ion Specific Chargers
Li-Ion batteries are lighter than other energy-equivalent secondary batteries, including both Ni-Cd and Ni-MH. However high charge levels and elevated temperatures from charging will hasten capacity loss. If overheated or overcharged, Li-ion batteries may suffer thermal runaway and cell rupture. In extreme cases this can lead to combustion. Deep discharge may short-circuit the cell, in which case recharging would be unsafe. The AdvanceTec™ Li-Ion charger makes use of VSCTM™ (Voltage Specific Control) when charging Li-Ion and Li-Poly chemistry batteries. The discharge pulse has a relaxing effect on the battery, increasing charge acceptance and allowing a charge at a lower temperature. Current is applied until the voltage limit per cell (as recommended by the cell manufacturer) is reached and then the precise voltage per cell limit (±.2%) is applied until the current declines below 3% of rated charge current. If voltage is applied exceeding the recommended voltage, it will cause a rapid and permanent reduction in the number of cycles in the battery.