Single bay battery charger for different carriers and mobile phones.

The AdvanceTec™ single bay battery charger is designed as an interchangeable battery adapter plate to allow the charging of different phone batteries on the AdvanceTec Single Bay AC/DC battery charging system. The “snap on/snap out” feature allows the battery adapter plate to be easily removed and replaced with other single bay battery charger plates available from AdvanceTec™.

  • Supports the phone’s Li-Ion batteries
  • Rapid charge
  • Batteries can be charged or topped up at anytime
  • Use as desktop or in-vehicle
  • Switches to maintenance mode when fully charged
  • LED indicators give battery charging status

Supports home/office and in-vehicle use (supplied by AdvanceTec™)

Sonim | Part No. ATT1012A LI
Kyocera | Part No. ATxxxxA LI
Samsung® Galaxy PRO™ | Part No. ATT1013A LI
Samsung® Rugby III™ | Part No. ATT1014A LI
Samsung® Galaxy S3™ | Part No. ATT1015A LI

DON’T BLAME THE BATTERY…
Before you contact your communications supplier to purchase a replacement battery, consider this: today’s high-quality nickel cadmium (Ni-Cd), nickel metal hydride (Ni-MH) and Lithium Ion (Li-Ion) batteries are only as effective as the chargers on which they are placed at the end of the day. Not all chargers are the same and different chemistry batteries need to be charged differently.

There are 2 very important aspects to the charging of a battery that inevitably will determine how long it will last after the charge and how long it will last before it drops below an acceptable level:

  • The method used to charge the battery
  • The method used to terminate the charge

AdvanceTec’s Li-Ion Specific Chargers
Li-Ion batteries are lighter than other energy-equivalent secondary batteries, including both Ni-Cd and Ni-MH. However high charge levels and elevated temperatures from charging will hasten capacity loss. If overheated or overcharged, Li-ion batteries may suffer thermal runaway and cell rupture. In extreme cases this can lead to combustion. Deep discharge may short-circuit the cell, in which case recharging would be unsafe. The AdvanceTec™ Li-Ion charger makes use of VSCTM™ (Voltage Specific Control) when charging Li-Ion and Li-Poly chemistry batteries. The discharge pulse has a relaxing effect on the battery, increasing charge acceptance and allowing a charge at a lower temperature. Current is applied until the voltage limit per cell (as recommended by the cell manufacturer) is reached and then the precise voltage per cell limit (±.2%) is applied until the current declines below 3% of rated charge current. If voltage is applied exceeding the recommended voltage, it will cause a rapid and permanent reduction in the number of cycles in the battery.